BROKER COMPARISON / COLUMN

INFINOX Leverage and Stop Out Level: 1:1000 Conditions, Margin Call and Stop Out

INFINOX leverage is up to 1:1000. The official FAQ gives a 50% margin call and 20% stop out, set per account group. See worked examples and how to check.

At 1:1000 on INFINOX, how much floating loss triggers a stop out? The account types page shows no such figure, and many traders get stuck here.

In short, maximum leverage is 1:1000 for both STP and ECN. The official FAQ (checked 17 October 2026) gives a margin call of 50% and a stop out of 20%. However, the levels are set per account group, so confirm your own account's figure in the terms.

Conclusion: INFINOX leverage is up to 1:1000, but check the levels per account

  • Maximum leverage: 1:1000 for both STP and ECN accounts (official account types comparison page)
  • 1:1000 comes with conditions: dynamic leverage applies, and leverage falls as trading volume grows
  • Margin call and stop out: the official FAQ gives 50% and 20%, but the levels are set per account group
  • Zero cut: the official FAQ says it applies to retail accounts. Check the conditions in the terms
  • Confirm your own account's levels in the terms at registration and in the trading platform display
Treat the sign-up screen and the terms as the latest word

This article summarises official information and does not prevent losses. Figures and conditions can change, so check the sign-up screen and the current terms.

INFINOX stop out level differs by account group

A stop out is the forced closing of open positions when the margin level falls below a set level. A margin call is the warning issued before that point.

What the official INFINOX Japanese pages state (account types comparison, dynamic leverage, official FAQ; checked 17 October 2026)
ItemOfficial page
Maximum leverage1:1000 for both STP and ECN
ConditionsMay differ by entity, client profile and account settings
Dynamic leverageApplies. Maximum leverage falls at each trading volume tier
Margin callOccurs when equity falls to 50% of required margin (official FAQ). The platform also has an automatic notification
Stop outExecutes automatically at 20%, and positions are closed in sequence (official FAQ)
How levels are setSet per account group by regulatory category. The calculation method and examples are in the client agreement (official FAQ)
Zero cutApplies to retail trading accounts. If the balance turns negative, support returns it to zero (official FAQ)
Margin requirementsMay be changed temporarily when liquidity is low

※ In this site's broker data, the stop out is listed as "check the account and conditions" and zero cut as "Yes*". Check the applicable conditions in the terms.

The 50% and 20% in the official FAQ may vary by account group. Do not apply another broker's figures to your account. Confirm the level in the terms.

Margin call and stop out levels by offshore forex broker, with the formula →

Calculating required margin and stop out distance at INFINOX 1:1000

Even if the level differs by account, required margin can be calculated. The formula is trade value ÷ leverage. At USD/JPY 150, the trade value of 1 lot (100,000 units) is JPY 15,000,000.

Required margin by leverage (USD/JPY 150, 1 lot, simplified)
LeverageRequired margin
1:1000JPY 15,000
1:500JPY 30,000
1:100JPY 150,000

※ This excludes spread, commission and swap. 1:500 and 1:100 are shown as examples of leverage lowered by dynamic leverage and do not match INFINOX's actual tiers.

Next, take a JPY 100,000 balance, 1:1000 and 1 lot. The table shows how the room before forced closing changes with the level. The levels are assumed values and may not match your account.

Room before forced closing at assumed levels (required margin JPY 15,000, USD/JPY, simplified)
Assumed levelEquity at forced closingAdverse move tolerated
50%JPY 7,500about 92.5 pips
20%JPY 3,000about 97 pips
0%JPY 0about 100 pips

※ On 1 lot, a 1 pip move is worth about JPY 1,000. Confirm the actual level in your account terms and the trading platform display.

Even at 1:1000, a move of about 100 pips can wipe out the funds

Leverage is high because required margin is small. Lot size decides the size of a loss. Holding 1 lot on JPY 100,000 brings the account close to its limit within 100 pips against you, whatever the level.

When dynamic leverage means you cannot use 1:1000

The official INFINOX page says dynamic leverage applies. As the total trading volume of your positions grows, maximum leverage falls in steps.

  • 1:1000 is available only while your volume stays within the first tier
  • When you pass a tier limit, the lower leverage applies only to the excess (per the official page)
  • Lower leverage raises required margin and lowers the margin level
  • Check the volume for each tier in the latest table on the official page
The tier figures are not listed here

We could not read the lot ranges in the official tier table reliably. This article therefore gives no volume figures per tier. Check the table directly on the official dynamic leverage page.

Offshore forex leverage comparison: brokers with up to 1:2000 or unlimited leverage, and limits →

How to check INFINOX margin call and stop out levels

  1. 01
    Check the applicable entity on the sign-up screen

    Save the entity name and the terms. The entity shown on this site's broker page is INFINOX Limited (Mauritius FSC, registration number GB20025832). The entity shown on the sign-up screen takes priority.

  2. 02
    Read the account terms and trading conditions

    Find the clauses on margin call and stop out. Conditions can change by entity or account settings, so read the version that applies to your account.

  3. 03
    Watch the margin level in MT4 or MT5

    The trading platform shows the margin level. Before opening a position, check required margin and margin level on a demo account.

  4. 04
    Ask official support if anything is unclear

    If you cannot find the level in the terms, contact support with your account number and account type. Save the reply as written.

INFINOX account types compared: STP and ECN spreads and commission →

Avoiding stop out at 1:1000: how to think about it

Whatever the level on your account, risk management should not rely on forced closing. Decide the stop-loss position first, and start trading with room to spare in your margin level.

  • Set a maximum loss, as a percentage of your balance, in advance
  • Work out lot size backwards from the adverse move you expect
  • Reduce volume around economic releases and before the weekend, when spreads widen
  • Avoid relying on extra deposits to keep escaping a stop out

INFINOX suits traders who choose on cost, such as STP with no commission or ECN with narrow spreads. How zero cut works is covered in a separate article.

What is zero cut in offshore forex: how it works, conditions and exceptions →

Frequently asked questions

Q. What is the maximum leverage at INFINOX?

A. It is 1:1000 for both STP and ECN accounts (official account types comparison page, checked 17 October 2026). It may differ by entity, client profile and account settings, and dynamic leverage also applies. Check the actual leverage on your account screen.

Q. What is the INFINOX stop out level?

A. The official FAQ (checked 17 October 2026) says a stop out executes when equity falls to 20% of required margin. The level is set per account group, and details are in the client agreement. Confirm your own account's figure in the terms.

Q. When does an INFINOX margin call happen?

A. The official FAQ says a margin call occurs when equity falls to 50% of required margin. The platform also has an automatic notification. Levels differ by account group, so check the terms and the margin level display in MT4 or MT5.

Q. Does INFINOX have zero cut?

A. The official FAQ says a zero cut system applies to retail trading accounts. This site's broker page lists it as "Yes*". Conditions and exceptions are set by the terms, so confirm them in the terms at registration.

Q. Why can't I use 1:1000 leverage at INFINOX?

A. Dynamic leverage applies. As the total trading volume of your positions grows, maximum leverage falls in steps. Conditions can also differ by account settings, so check the latest tier table on the official page.

Sources and conditions

Where to confirm the current conditionsThis column was edited on 17 October 2026 from the official sources above and FX Textbook listing data. Trading conditions, offers and applicable terms can change; confirm the current terms in each broker's official client area before you act.
Important risk information

FX Textbook is an independent information site, not a broker or provider of personal investment advice. Forex and CFDs involve risk. You may lose some or all of your invested capital. No trading result is guaranteed.

NEXT STEP

Check the levels, then compare INFINOX account conditions.

STP and ECN spreads, commission, maximum leverage of 1:1000 and the account-opening steps are set out on the broker page. Check the terms on the sign-up screen before choosing an account.

View INFINOX account conditions →

Brokers covered in this column

Account types, trading conditions and current offers are on each broker page.

BROKER INFORMATIONINFINOX: account options and conditions

Compare featured brokers on one basis →

Background reading

RISK MANAGEMENTWhat is stop-out in forex? Margin, leverage and liquidation riskFOREX BASICSForex risks to understand before you start

More columns on this broker

BROKER COMPARISON · 20 October 2026INFINOX Gold (XAUUSD) Trading Conditions: Spreads, Leverage and the Difference Between STP and ECN AccountsBROKER COMPARISON · 17 October 2026INFINOX vs Axi: Spreads, Fees, Leverage and Copy Trading ComparedBROKER COMPARISON · 17 October 2026INFINOX Login Guide: My Account, MT4/MT5 and IX App Steps and FixesBROKER COMPARISON · 17 October 2026INFINOX Deposit and Withdrawal Methods: Fees, Processing Time, Minimums and Withdrawal RulesBROKER COMPARISON · 17 October 2026How to Open an INFINOX Account: Steps, Required Documents, ID Verification and First DepositCAMPAIGNS · 17 October 2026INFINOX Bonus 2026: 20% Deposit Credit Conditions, Eligible Accounts and Withdrawal Rules
← Back to columnsNews & updates →